BevRC
FY-DOS&GPS AUTOPILOT VERSION
Download the manual here:, , Including:, three-axisdigitalaccelerometer, Functions could be set through software:, 1, Your purchase includes:, 1: DOS Control Module, 2: GPS module, 3: USB cable;, 4: Related wirings, 5: English manual,
DoS is an aeromodelling balancing instrument designed for a variety ...BevRC
FY-DOS INERTIAL ATTITUDE STABILIZER
| Download the manual here | Including |
BevRC
FRSKY TFR8SB- COMPATIBLE WITH FUTABA FAAST RADIO WITH SBUS AND RSSI PORT
| FASST 2.4GHz Air Systems (7CH Mode/Multi Mode) | 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc |
| Model | TFR8SB (8CH FASST compatible receiver with RSSI & SB ports) |
| Dimension | 44.5*27.5*17mm |
| Operating Voltage Range | 3.5~10V |
| Operating Temperature Range | -10℃~80℃ |
| Mode A | RED LED blinks |
| Mode B | GREEN LED blinks |
:11.5g, :, 14ms (FS – Normal Speed Mode), Note: Be sure that when using battery or regulated output from ESC, the capacity must meet the usage conditions of servos., Use native failsafe position preset on the transmitter side:, If not disabling failsafe on the transmitter side, TFR8SB will use native failsafe position preset on the transmitter side., Set failsafe on TFR8SB side:, TFR8SB supports failsafe function for all channels. Follow the steps below to set failsafe on TFR8SB:, 1) Bind the receiver first, and disable failsafe on the transmitter side;, Note: HS mode is only applied for high-speed digital servos. Other servos should select FS mode, otherwise servos will get hot or even burn out., Note: Do not perform linking procedure while motor’s main wire is connected or engine is operating, otherwise damage may occur. After linking is completed, recycle the receiver power and check if the receiver is really under control by linked transmitter.,
It's a good choice for your multi-rotor with Naza or ...BevRC
CARBON PROPELLER BALANCER
,
Ultilize the high performance N45 magnet, carbon frame built. Take ...BevRC
M3 DAMPING RUBBER NUT TYPE B
,
Used to minimize the vibration between frame and caerma gimbals, ...BevRC
G10 STAND ALONE GIMBAL FOR GOPRO
| https | //www.youtube.com/watch?v=hHbn-qmOn74&list=UL |
| https | //www.youtube.com/watch?v=V9CrfQu5Yxw&list=UL |
Check "How to" here:, How to get G10 stand-alone camera gimbals working?, Eqiupped with 2 custom servos and specially design gimbal comtroller, belt driving tilt, don't be fooled by it's looking and components, the performance beyonds all of the servo driving pan-tilt in the market. Just check the video below:, , More flight videos:,
This maybe the best stand alone 2-axis gimbal for gopro, ...BevRC
TAROT 2212 KV920 BLUE MOTOR
:, The, : 8MM, : 22.0mm, : 19.0mm, : 12, Poles:, 14, :, 14Turn, :3, :, 920RPM/Volt, :, 0.5Amps, : 28mm, : 38.5mm, :, 30.6mm, :, 55Grams,
Suiable for multi-rotor with whole weight 2kg, 18cm long power ...BevRC
DAYU 100G AV DAMPING BALLS(RED)
2: 150g payload for 2 balls, eliminate vibration in 170khz by 88%, 120khz by 88%, 85khz by 78%,
10 balls in a bag. The famous DAYU AV balls ...BevRC
TAROT T2D GOPRO HERO3 TWO-AXIS BRUSHLESS GIMBAL/WITH GYRO
| 7, support Receiver | conventional receiver, S-BUS receiver, DSM2/DSMJ/DSMX receiver |
| 8, support for remote devices | PPM/PCM/2.4G |
| 9, the working voltage | DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery) |
| 10, working current | 200mA-500mA (power supply voltage and the motor related) |
| 11, the working environment temperature | -15 ℃ ~ 65 ℃ |
| 12, the processor | Dual 32-bit high-speed ARM core processor |
| 13, the sensor | Three rotor MEMS gyroscope rotor MEMS accelerometers and the three |
| 14, the maximum angular rate | 2000°/ sec |
| 15, the maximum acceleration | 16g |
| 16, the control frequency | 2000Hz |
| 17, the motor drive frequency | 20KHz (no noise smoothing driven) |
| 18, the control accuracy | 0.1° |
| 19, the control angle range | -45 °~ 45 °(roll), -135°~ 90°(tilt) |
| 20, pose solver algorithms | PTZ dedicated brushless motor decoupled EKF algorithm |
| 21, for shooting equipment | GOPRO Hero3 |
| Weight | 195g |
Gopro two-axis brushless PTZ English software description and download link:, , Product Features:, 1, support GOPRO Hero3 video auxiliary output, Related Part Number:, Head hanging hook TL68A01, Specifications:, GOPRO brushless pan rack assembly TL68A08 x1,
Download the manual here. T-2D PTZ is TAROT company for ...BevRC
MASTOR-G REFURBISHED FULL FUNCTION COMBO
| Free Download | firmware update.zip |
| Weight | 232g without camera |
| roll | 0.07 degrees; pitch |
| 12-hours angle drift | 0.12-1.5 degrees |
| Suitable payload | 120g-400g |
| Suitable flying wind Speed | < 38km/h |
Free Download:, Mastor-G quick start manual 2013-5-18.pdf, Free Download:, GoPro-G Assistant Software.zip, Specs:, Based on STM32 32-bits high-speed MCU(tens of times faster than other open-source solutions), Size:, 10.7(12.5)*11*12cm, Roll angle limit:, > 360 degrees, Pitch angle limit:, >180 degrees, can be controlled by any p, : roll: 178 degrees/s; pitch: 182 degrees/s, Control accuracy:, Recommend camera:, gopro hero1,hero2, hero3, or similar cameras, Power:, 2-4 cell lipo, 3-cell recommend, can be powered as high as 6-cell(the high voltage input need to be reduce the power output parameters in the configuration tool.), COG adjustment range: X: 28mm Y:12mm Z:36mm,
The refurbished verson are mainly coming from the RMA processing, ...BevRC
MASTOR-G REFURBISHED FULL FUNCTION COMBO
| Weight | 232g without camera |
| roll | 0.07 degrees; pitch |
| 12-hours angle drift | 0.12-1.5 degrees |
| Suitable payload | 120g-400g |
| Suitable flying wind Speed | < 38km/h |
Specs:, Based on STM32 32-bits high-speed MCU(tens of times faster than other open-source solutions), Size:, 10.7(12.5)*11*12cm, Roll angle limit:, > 360 degrees, Pitch angle limit:, >180 degrees, can be controlled by any p, : roll: 178 degrees/s; pitch: 182 degrees/s, Control accuracy:, Recommend camera:, gopro hero1,hero2, hero3, or similar cameras, Power:, 2-4 cell lipo, 3-cell recommend, can be powered as high as 6-cell(the high voltage input need to be reduce the power output parameters in the configuration tool.), COG adjustment range: X: 28mm Y:12mm Z:36mm,
The refurbished verson are mainly coming from the RMA processing, ...BevRC
FEIYU G3 2-AXIS BRUSHLESS GIMBAL
| Weight | 178g |
| Working voltage | 8-18v |
| control accuracy | 0.1 degrees |
| pitch | -180----60 degrees |
| roll | -55---+55degrees |
movement angle:,
The Feiyu G3 brushless gimbal offer a totally different solution ...BevRC
AOMWAY 12DBI 5.8G HELICAL ANTENNA WITH SMA CABLE
,
This is a perfect antenna for long range 5.8G video ...